Shopping Cart
Edit cart-
×
Replacement Pull for B12 Sausage GunsItem: 873-231 × $9.48 = $9.48
Subtotal: $9.48
B18S20 Schematic
Albion B18S20 B-Line Manual Sausage Gun Parts Reference
Keep your equipment operating at peak performance with genuine Albion replacement parts. Use the schematic diagram below to identify the exact component you need. We have everyday consumables items like cone nozzles and sausage pistons to complete handle and trigger rebuilds. Locate the item number, match it to the corresponding row in the index, select your required quantity, and click Add to Cart to update your order instantly without leaving the page.
| Item # | Part # | Description | Std Qty | Quantity |
|---|---|---|---|---|
| 1 | 873-5 | FRONT CAP | 2 | |
| 2 | 873-8 | BARREL | 1 | |
| 3 | 37-50 | NYLOC NUT | 1 | Not Sold Separately |
| 4 | 39-111 | WASHER | 1 | Not Sold Separately |
| 5 | 873-6 | SAUSAGE PISTON | 1 | |
| 6 | 873-10 | PISTON WASHER | 1 | Not Sold Separately |
| 7 | 37-51 | JAM NUT | 1 | Not Sold Separately |
| 8 | 873-22 | PISTON REPLACEMENT KIT | — | |
| 9 | 873-26 | BARREL SCREW NUT | 1 | Not Sold Separately |
| 10 | 873-49 | BACKCAP WASHER | 1 | Not Sold Separately |
| 11 | 873-51 | BACKCAP SPACER | 1 | Not Sold Separately |
| 12 | 873-47 | BARREL SCREW HOLDER | 1 | Not Sold Separately |
| 13 | 10-130 | SCREW | 3 | Not Sold Separately |
| 14 | 873-46 | BARREL SCREW | 1 | Not Sold Separately |
| 15 | 873-57 | GRIPPING PLATE/SPRING KIT | 1 | |
| 16 | 873-44 | HANDLE/TRIGGER KIT | 1 | Not Sold Separately |
| 17 | 873-45 | RECOIL/SPRING/PIN KIT | 1 | Not Sold Separately |
| 18 | 873-23 | PULL | 1 | |
| 19 | 873-41 | PULL NUT | 2 | |
| 20 | 873-3 | CONE NOZZLE | 3 | |
| 21 | 873-2 | NARROW NOZZLE | 3 | |
| 22 | 873-35 | BULK PISTON | 1 | |
| 23 | 873-70 | ROD | 1 | Not Sold Separately |
| 24 | 310-3 | HOOK PULL | 1 | |
| 25 | 935-4 | BENT CONE NOZZLE (SOLD SEPARATELY) | — | |
| 26 | 1135-4 | SQUARE CONE NOZZLE (SOLD SEPARATELY) | — |
Frequently Asked Questions
How do I convert my Albion B18S20 between sausage packs, cartridges, and bulk dispensing?
The Albion B18S20 features a highly adaptable internal drive rod. To prevent material blow-by or mechanical jamming, configure your piston stack based on your material packaging:
- The Albion B18S20 features a highly adaptable internal drive rod. To prevent material blow-by or mechanical jamming, configure your piston stack based on your material packaging:
- For Sausage Packs: Ensure the black polyplastic 873-6 Sausage Piston (Item 5) is installed on the rod, supported from behind by the steel 873-10 Piston Washer (Item 6). This creates a full 2-inch seal against the barrel walls to cleanly deflate foil sausage bags without wrapping or binding.
- For Rigid Cartridges (10oz / 12oz): Remove the plastic Sausage Piston (Item 5) completely. Because a rigid cartridge shell is narrower than the gun's aluminum barrel, the 2-inch plastic cup will block it. Adjust your backing nut halfway up the threads and use only the bare steel 873-10 Piston Washer (Item 6) to reach inside the cartridge and press its rear plunger forward.
- For Bulk Pail Material (Suction Loading): Strip the sausage components off the rod entirely and substitute the specialized 873-35 Hytrel Bulk Piston (Item 22). This configuration creates the heavy-duty vacuum seal required to pull loose material straight up into the 873-8 Barrel (Item 2) without bypass leakage.
Which specialized nozzle upgrades are available for the 873-5 Front Cap?
To optimize your material output profile, you can swap out standard nozzles for application-specific accessories designed to thread perfectly onto the 873-5 Front Cap (Item 1):
- 935-4 Bent Cone Nozzle (Item 25): Specially angled for hard-to-reach joints, log chinking corners, and technical window perimeters where straight access is blocked.
- 1135-4 Square Bead Nozzle (Item 26): Engineered to output structural, clean square sealant joints natively, eliminating the need for manual tooling.