B12S20 Schematic
Albion B12S20 B-Line Manual Sausage Gun Parts Reference
Keep your equipment operating at peak performance with genuine Albion replacement parts. Use the schematic diagram below to identify the exact component you need. We have everyday consumables items like cone nozzles and sausage pistons to complete handle and trigger rebuild kits. Locate the item number, match it to the corresponding row in the index, select your required quantity, and click Add to Cart to update your order instantly without leaving the page.
| Item # | Part # | Description | Std Qty | Purchase Control |
|---|---|---|---|---|
| 1 | 873-5 | FRONT CAP | 2 | |
| 2 | 873-8 | BARREL | 1 | |
| 3 | 37-50 | NYLOC NUT | 1 | |
| 4 | 39-111 | WASHER | 1 | |
| 5 | 873-6 | SAUSAGE PISTON | 3 | |
| 6 | 873-10 | PISTON WASHER | 1 | |
| 7 | 37-51 | JAM NUT | 1 | |
| 8 | 873-22 | PISTON REPLACEMENT KIT | — | |
| 9 | 873-99 | BACKCAP WASHER | 1 | |
| 10 | 873-98 | BACKCAP SPACER | 1 | |
| 11 | 873-40 | GRIPPING PLATE/SPRING KIT | 1 | |
| 12 | 873-103 | HANDLE/TRIGGER KIT | 1 | |
| 13 | 873-39 | RECOIL/SPRING/PIN KIT | 1 | |
| 14 | 873-23 | PULL | 1 | |
| 15 | 873-41 | PULL NUT | 2 | |
| 16 | 873-3 | CONE NOZZLE | 3 | |
| 17 | 873-2 | NARROW NOZZLE | 3 | |
| 18 | 873-35 | BULK PISTON | 1 | |
| 19 | 873-9 | ROD | 1 | |
| 20 | 310-3 | HOOK PULL | 1 | |
| 21 | 935-4 | BENT CONE NOZZLE (SOLD SEPARATELY) | — | |
| 22 | 10-136 | SCREW | 3 | |
| 23 | 1135-4 | SQUARE BEAD NOZZLE (SOLD SEPARATELY) | — |
Frequently Asked Questions
How do I convert my Albion B12S20 between sausage packs, cartridges, and bulk dispensing?
The Albion B12S20 features a highly adaptable internal drive rod. To prevent material blow-by or mechanical jamming, configure your piston stack based on your material packaging:
- For Sausage Packs: Ensure the black polyplastic 873-6 Sausage Piston (Item 5) is installed on the rod, supported from behind by the steel 873-10 Piston Washer (Item 6). This creates a full 2-inch seal against the barrel walls to cleanly deflate foil sausage bags without wrapping or binding.
- For Rigid Cartridges (10oz / 12oz): Remove the plastic Sausage Piston (Item 5) completely. Because a rigid cartridge shell is narrower than the gun's aluminum barrel, the 2-inch plastic cup will block it. As shown in the "Cartridge Dispensing" diagram detail, adjust your backing nut halfway up the threads and use only the bare steel 873-10 Piston Washer (Item 6) to reach inside the cartridge and press its rear plunger forward.
- For Bulk Pail Material (Suction Loading): Strip the sausage components off the rod entirely and substitute the specialized 873-35 Hytrel Bulk Piston (Item 18). This configuration creates the heavy-duty vacuum seal required to pull loose material straight up into the 873-8 Barrel (Item 2) without bypass leakage.
Which specialized nozzle upgrades are available for the 873-5 Front Cap?
To optimize your material output profile, you can swap out standard nozzles for application-specific accessories designed to thread perfectly onto the 873-5 Front Cap (Item 1):
- 935-4 Bent Cone Nozzle: Specially angled for hard-to-reach joints, log chinking corners, and technical window perimeters where straight access is blocked.
- 1135-4 Square Bead Nozzle: Engineered to output structural, clean square sealant joints natively, eliminating the need for a separate manual tooling step.
- 873-3 Standard Cone Nozzles (3-Pack): Traditional heavy-duty polymer replacement nozzles that can be easily trimmed with a utility knife to match your precise target joint width.